AC duct cleaning in International City

Teluscare has a wide range of services where it operates. The service covered under Ac duct cleaning are as follows:

1.       Open access ports or doors to allow the entire system to be cleaned and inspected.

2.       Inspect the system before cleaning to be sure that there are no asbestos-containing materials (e.g., insulation, register boots, etc.) in the heating and cooling system. Asbestos-containing materials require specialized procedures and should not be disturbed or removed except by specially trained and equipped contractors.

3.       Use vacuum equipment that exhausts particles outside of the home or use only high-efficiency particle air (HEPA) vacuuming equipment if the vacuum exhausts inside the home.

4.       Protect carpet and household furnishings during cleaning

5.       Use well-controlled brushing of duct surfaces in conjunction with contact vacuum cleaning to dislodge dust and other particles.

6.       Use only soft-bristled brushes for fiberglass duct board and sheet metal ducts internally lined with fiberglass.

7.       Take care to protect the duct work, including sealing and re-insulating any access holes the service provider may have made or used so they are airtight.

8.       Follow NADCA's standards for air duct cleaning and NAIMA's recommended practice for ducts containing fiber glass lining or constructed of fiber glass duct board.

These are the services included for the ac duct cleaning service.

If the Ac duct Cleaner has every tool mentioned above then how to determine whether the process he undertook was right or not.  Don’t worry we at Teluscare will provide you with the Service process which the Ac duct cleaner should professionally follow.

A thorough visual inspection is the best way to verify the cleanliness of your heating and cooling system. Use of remote photography to document conditions inside ducts. All portions of the system should be visibly clean, you should not be able to detect any debris with the naked eye.