Ensure your air conditioner runs efficiently with our professional AC maintenance Al Zahya

These are the services covered under ac repair/maintenance:

1. Shut of the Power

2. Remove Debris

3. Clean the Fins

4. Straighten the Fins

5. Clean area around the Unit

6. Level the Unit

7. Clean the Evaporator Coil

8. Clean a Plugged Evaporator Drain

9. Change the Blower Filter

10. Turn the Power Back On

Tools that are required for ac repair/ maintenance are:

1. Reciprocating Saw Blades

2. Vacuum Pump

3. Refrigerant Scale

4. Cordless Drill

5. Screwdrivers

6. Pipe Wrenches and Pliers

7. Tin Snips and Shears

8. Multi-Meter and Voltage Tester.

1. Reciprocating Saw Blades - The ability of a reciprocating saw to cut through just about anything makes it a valuable and flexible tool that no technician should go without. Though your technician will likely purchase and maintain the saw itself, you’ll want to make sure that they choose a model with a high build quality which will still work well through years of daily use.

2. Vacuum Pump - The pump’s ability to suck moisture and air out of air conditioning lines can help them determine which lines have leaked before charging the system with refrigerant. The wide variety of models, however, can make it difficult to determine which pump suits the needs of your company and your technicians.

3. Refrigerant Scale - A refrigerant scale helps to address these issues by measuring the weight of refrigerant as it’s added to or removed from the unit’s compressor. This gives your technician the required information to place in just the maximum amount because the system needs. That same capability helps your technician to spot if the system suffers from a leak, allowing them the chance to repair a little problem before it becomes an enormous one.

4. Cordless Drill - A cordless drill represents an essential tool for its portability, power, and versatility. Equip your technicians with a drill of a minimum of 18 volts and don't forget a group of bits, including Phillips, hex, hole saws, and arbors. Keep a minimum of two batteries available to assist make sure that your technician’s drill can last the whole day without having a charge.

5. Screwdrivers - Your set should include a variety of Phillips, flat head, and hex screwdrivers in different sizes to accommodate the different screws and bolts used in systems. In many cases, a heavy-duty screw driver can serve multiple uses, including prying apart venting. Make sure to find screwdrivers that have insulated handles, so as to prevent the risk of electrical shock.

6. Pipe Wrenches and Pliers - While more commonly associated with plumbing, a set of pipe wrenches can work on many systems involving natural gas line and connections to plumbing. For smaller connections and to higher manipulate wiring, keep a collection of pliers handy, including needle-nose, channel-lock, open-face, wire strippers, and linesman pliers. Finding pliers with insulated handles reduces the danger of electric shock .

7. Tin Snips and Shears - Make sure that your techs equip themselves with all three types of tin snips, including straight aviators, lefts (reds), and rights (greens). Each sort of tin snip allows for various positioning and cut direction for better precision. For longer, line cuts, a robust pair of steel shears with an insulated handle can help your tech get the work done.

8. Multi-Meter and Voltage Tester - Since systems are very much connected to electrical systems, it is imperative that your techs are equipped with electrical testers to verify the presence of live wires, measure voltage, measure resistance, and quickly conduct other electrical tests call at the sector . Electrical mishaps not only endanger the security of your tech, they will also cause devastating damage to your customer.

• Trustworthy
  All the service providers on TelusCare are approved only after a complete background check of the company. To make sure the cleaners are professional, verified and trained cleaners.
   
• Book Now or Schedule
  Browse and select the services and cleaners directly based on the availability, rate and customer reviews.
   
• 360-degree support
  The only online portal that provides 360-degree technology support to book your choice of Pest Control Service Company and its professional in UAE
   
• Flexible Contracts
  Flexibility to choose from daily, weekly, monthly and yearly contracts for your home and office.
   
• Real-time tracking
  With you from booking the service to service completion.
   
• TelusCare enables you to monitor real-time schedule and job progress even when you are away from home.
   
• Promotions and Reward Points
  Exciting discounts and reward points are available at the time of booking.

What more?

TelusCare e-wallets and reward programs for easy online bookings and chance to avail free services!